You can change the starting condition via the app.
If you chose to start a game when the lid is opened, a staff
member would need to insert the key, turn it once, remove the
key while keeping the lid semi closed (so no light can go into the
sensor hole). After that the case is “armed” and the game will
start when the lid is fully open again.
The key switch instead of regular on/off switch is important, so the players
can’t turn or restart the device during a game. If you leave the key to the
players, it is possible but unlikely they will figure out how to turn the device off
and on again.
3.3 When the game ends?
●
The game will end after all the modules are solved and the
STOP
button
has been pressed, then the lights will flash green and victory text will be
displayed.
●
Players will lose if they run out of total mistakes or when the time lost
penalty is greater than remaining game time.
Please remember that if you run a fun only game, you can set maximum
mistakes to 999 and no time lost on each mistake.
3.4 How to turn the device off?
To turn off the case, you have to insert the key and turn it twice within 2
seconds. This will shut down the battery power, then after turning it once again
after a while the game will start as described in
3.2
.
3.5 Resetting the device
To reset the prop and make it ready for another game follow this steps:
1. Remove all jack cables.
2. Flip all the switches to OFF state.
3. Lock the STOP button lid with padlock.
4. Twist the red two stage button.
6