2000-10
STEP 17
Disconnect and tag all wiring connections from the
engine. These include the starter motor, the alterna-
tor, the water temperature switch, the oil pressure
switch, the thermostat unit, the air filter restriction
switch and the fuel injection pump stop solenoid.
STEP 18
3
3
7
7
STEP 20
Remove the six screws (41) from the gear lever tower
(40) and slide the tower up the lever (42).
STEP 21
Disconnect the clutch switch wiring connection (44)
and remove the spring (46) from the shift lever.
STEP 22
Remove the bolt and nut (43) and (45) from the shift
lever and remove the lever from the transmission.
STEP 23
Put the wiring ties which attach the electrical harness
to the support rail at the rear of the engine.
STEP 24
Release the oil cooler hose clamp on the right hand
side of the chassis.
STEP 25
3
3
9
9
3
3
8
8
789M265A
Remove the front floor mat (37) in the cab. Remove
the four screws (39) from the centre front floor plate
(38) and remove the plate.
STEP 19
789M288A
Disconnect the fuel inlet and discharge pipe (47) and
(48) from the fuel lift pump.
CI98G501
Remove the six screws (41) from the gear lever tower
(40) and slide the tower up the lever (42).
Cre 7-21290GB
Issued 10-99
41
40
42
43
46
45
44
4
4
8
8
4
4
7
7