Case 580ST, Operator'S Manual

Page: 92 / 434

3 - CONTROLS AND INSTRUMENTS
Control panel and side instrument (580T mechanical motor)
LEIL12TLB00005I
1
1. Front work light switch: This switch has three
positions:
• The first position is OFF (control lamp off).
• Second position, by pressing the symbol side (first
click) the outer front work lights are turned on (con-
trol lamp on).
• Third position, by pressing the symbol side again
(second click) the inner front work lights are turned
on too (control lamp on).
2. Light switch: This switch has three positions:
• The first position is OFF (control lamp off).
• Second position, by pressing the symbol side (first
click) the instrument cluster panel is powered, the
side lights and the low beam indicator lamp are
turned on (control lamp on).
• Third position, by pressing the symbol side again
(second click) the high beams are enabled and the
low beams and the low beam indicator lamp are
turned on (control lamp on).
3. Side work light switch (Optional): This switch has
two positions:
• The first position is OFF (control lamp off).
• Second position, by pressing the symbol side, the
side work lights turn on at the same time (control
lamp on).
4. Backhoe attachment locking switch:
• The switch is used to lock or unlock the backhoe at-
tachment safety hook in preparation for road travel.
5. Rear work light switch: This switch has three
positions:
• The first position is OFF (control lamp off).
• Second position, by pressing the symbol side (first
click) the outer rear work lights are turned on (con-
trol lamp on).
• Third position, by pressing the symbol side again
(second click) the inner rear work lights are turned
on too (control lamp on).
6. Side instrument cluster: See Page 3-34 for details.
7. Backhoe attachment quick coupler switch (Optional):
• Press both switches to activate the quick coupler
of the backhoe attachment.
• Press
on the 2 switches to unlock (retract pins)
of quick coupler on backhoe attachment.
• Press
on the 2 switches to lock (extend pins)
of quick coupler on backhoe attachment.
8. Rear windshield wiper and washer switch: This
switch has three positions:
• The first position is OFF (lamp off) and both the
windshield wiper and the windshield washer are
disabled.
• The second position allows to press the symbol
side of the switch to activate the rear windshield
wiper (lamp on).
• The third position, allows to press the symbol side
of the switch and hold to activate the windshield
washer (lamp on). When releasing the switch, the
windshield washer stops and the windshield wiper
starts moving.
9. Backhoe attachment side shift carriage hydraulic
shifting switch:
• This switch allows hydraulically moving the back-
hoe attachment towards the track sides.
3-30