8 - TROUBLESHOOTING
Loader attachment
PROBLEM
POSSIBLE CAUSE
CORRECTION
Valve spool leaking.
Inspect the spool and check it for
wear or scratches.
The lifting circuit fails to operate, is
slow or loses power.
Cylinder seals leaking or cylinder
barrel damaged.
Inspect and reseal the cylinder.
The relief valves are stuck open, set
to a too low value or there is a leak
in the seat.
Check the bucket circuit relief valve.
Valve spool leaking.
Inspect the spool and check it for
wear or scratches.
The bucket fails to operate, is slow
or loses power.
Cylinder seals leaking or cylinder
barrel damaged.
Inspect and reseal the cylinder.
Damaged cylinder barrel.
Inspect and reseal the cylinder.
Cylinder leak (spools in neutral).
Internal valve leak.
Inspect the spool and check it for
wear or scratches.
Hesitation in the raising movement
of the loader attachment or of the
bucket cylinders when the control is
initially actuated.
Load check valve between control
valve sections damaged.
Disassemble and inspect.
8-21
Summary of Contents for 580ST
