Engine - Engine and crankcase
33. With help of an assistant or an appropriate lifting de-
vice, move the line and harness assembly
(1)
over the
engine. Secure to the hood support with the four bolts
(2)
removed earlier.
RCPH10CCH037BAB
24
34. Inspect the rubber mounts (right side shown)
(1)
for
the line and harness assembly. Replace as neces-
sary.
Place the support alignment holes over the
studs, and secure with the washers and nuts
(2)
removed earlier.
RCPH10CCH572AAB
25
35. Connect the elbow
(1)
to the deaeration tank, and
tighten the hose clamp
(2)
.
RCPH10CCH795AAB
26
36. Install the starter solenoid wire
(1)
, secure with the
screw
(2)
removed earlier and reinstall the plug
(3)
.
RCPH10CCH818AAB
27
47533562 02/10/2013
10.1 [10.001] / 24
