INTRODUCTION
Before starting the tractor, be sure that all controls are in neutral or park lock position.
Before starting the engine, make sure that all attached implements are lowered to the ground.
Start the engine only from the operator’s seat. If the safety start switch is bypassed, the engine can start with the
transmission in gear. Do not connect or short across terminals on the starter solenoid. Attach jumper cables as
described in the manual. Starting in gear may cause death or serious injury.
Always keep windows, mirrors, all lighting, and Slow Moving Vehicle (SMV) emblem clean to provide the best possible
visibility while operating the tractor.
Operate controls only when seated in the operator’s seat, except for those controls expressly intended for use from
other locations.
48144025 23/06/2017
8
