Case IH FARMALL 30A, Service Manual

Page: 30 / 51

INTRODUCTION
Model
Farmall 30A
Hydrostatic/Gear
Model
Farmall 35A
Hydrostatic/Gear
Electrical system
Alternator 12 V , Heavy duty, 85 A 12 V , Heavy duty, 85 A
Battery 12 V , w/ negative ground, 80 / 660
cca BCI Group 34
12 V , w/ negative ground, 80 / 660 cca
BCI Group 34
Starting motor Solenoid pre-engaged reduction Solenoid pre-engaged reduction
Cold - start aid Glow plug Glow plug
Fuel system
Fuel type Diesel Diesel
Type of fuel to use if above -7 °C
( 19 °F )
No. 2-Diesel, Cetane rating: minimum
40 No. 2-Diesel, Cetane rating: minimum
40
Type of fuel to use if below -7 °C
( 19 °F )
No. 1-Diesel, Cetane rating: minimum
40 No. 1-Diesel, Cetane rating: minimum
40
Sulphur content (Maximum) : No. 1-Diesel 0.3 %
Sulphur content (Maximum) : No. 2-Diesel 0.3 %
Injection pump :
Type In-line In-line
Timing 15 - 16.5 ° BTDC 15 - 16.5 ° BTDC
Gear Transmission
Clutch
Type
Dry disc Dry disc
Number of clutches 1 1
Number of plates 1 1
Material
Organic Organic
Plate diameter 240 mm ( 9.4 in ) Transmission 12x12
Trans
240 mm ( 9.4 in ) Transmission 12x12
Trans
Plate surface area 25133 mm² ( 39 in² ) 25133 mm² ( 39 in² )
Method of operation
Foot-Mechanical Foot-Mechanical
Pedal : Free-travel 20 - 30 mm ( 0.79 - 1.2 in ) 20 - 30 mm ( 0.79 - 1.2 in )
HST Transmission
Number of range gears and speeds 3 3
Range synchronization None None
Number of gear levers 1 1
Cruise control offering STD STD
Cruise control type Electro - magnetic Electro - magnetic
High pressure relief valve setting 33336 kPa ( 4835 psi ) 33336 kPa ( 4835 psi )
Trans/rear axle oil capacity 32 L ( 8.5 US gal ) 32 L ( 8.5 US gal )
Service brake
Type Wet disc Wet disc
Actuation Mechanical Mechanical
Number of plates - per axle 2 2
Total number pf Plates 4 4
Disc lining diameter OD 223 mm ( 8.78 in ) 223 mm ( 8.78 in )
Disc lining diameter ID
174 mm ( 6.85 in ) 174 mm ( 6.85 in )
Lining type (Material) Paper Paper
Service brake pedal parking lock Yes Yes
47881876 14/01/2016
23