Engine - Engine and crankcase
28. On the left-hand side, disconnect the connector of the
power cable of the cab
(1)
. Free the connector from
the clamps. Move the connector onto the maxi fuse
box.
29. Detach the bracket
(2)
supporting the cab connectors,
cab power, and cup filter
(3)
. Disconnect the pipe that
joins the latter to the mechanical priming pump on the
sediment filter.
WLAPL4S10C139A
23
30. Hook the rear part of the engine to a hoist using chains
or ropes for lifting. (Apply two eyebolts, one to the
right-hand side and one to the left-hand side, on the
upper part of the flange containing the flywheel.) Po-
sition a fixed jack stand
(2)
under the clutch case
(1)
near the engine attachment flanging. Apply the hand
brake.
WLAPL4S10C129A
24
31. Position the movable tool for dismantling tractors
(2)
380000405
with the bracket and adapter plate under
the engine. Place a wooden block
(1)
between the
points of contact between the tool and the engine.
Wedge the axle to prevent swinging.
WLAPL4S10C140A
25
32. Remove the retaining bolts
(1)
between the engine
and the transmission.
WLAPL4S10C130A
26
47878246 08/06/2015
10.1 [10.001] / 18
