44
Headland creation
Æ
Required for Accuturn PRO
The minimum requirement to have guidance lines on the headland as well is the recording of a field and boundry
creation. Afterwards follow these steps:
1.
Under Swath manage select the very left box. (2) Choose Square Headland (3) Press EDIT
Æ
The Headland
Setup opens
4.
Now you see one headland swath around the field in RED. So every headland swath has an A&B point and is
marked in red. Next step is to add aditional swathes on other sides if required
Use fingers!!!
5.
In the right hand side grey box you see point A is active. This means you can move point A with your finger to
another position on the active headland line. In this way headland lines are adjusted.
6.
Now add an addidtional swath at the
headland. Choose Add! (7) A new red line
appears. Tap with your finger exactly on
this line, it then turns blue.
8.
Choose Modify
Æ
(9) With the arrows on
the far right side you can jump from one
line to another. Do this until you have
reached the line you want to adjust.
10. Now use your fingers again to adjust the
poisition of A or B. If this is ready the
second headland line is done.
11. Repeat everything again starting with Step
6 until you have all headland swathes
created.
12. You can also select how many headland
swathes you want. This depends on the
implement.
5
Summary of Contents for ActiveDrive 8
Page 48: ...www caseih com...
