CASE CONSTRUCTION CX37C, Operator'S Manual

Page: 154 / 228

6 - MAINTENANCE
Travel reduction gears
Replace the travel reduction gears oil after the first
500 h of service, then replace the travel reduction
gears oil every 1000 h .
To replace the travel reduction gears oil perform the
operations described on page
6-47 .
Swing bearing
Grease the swing bearing after the first 50 h , then every
250 h .
To lubricate the swing bearing, refer to page 6-34 .
Grease points (Bucket)
Lubricate the bucket linkage every 10 h within the first
100 h , then lubricate every 50 h .
To lubricate the bucket linkage refer to page 6-24 .
6-18