CASCO Nano Cube, Owner'S Manual

Page: 3 / 9

IMPORTANT
– DO NOT touch the plug strip with wet hands! Risk of electric
shock!
Each plug is labelled with the piece of equipment that it supplies:
- System Pump
- UV Filter
- Heater 1
- Heater 2
When you unplug an item, carefully pull the plug towards you. Draw sufficient
cable through over the filter system so that you can lay the plug safely on dry
ground in front of the unit. DO NOT allow the plug to drop into the filter system!
To reconnect the piece of equipment, check the plug is clean and dry and
reverse the above process. Feed excess cable back behind the system and
reconnect the plug. Check that the equipment is operating correctly.
Water Flow
Each aquarium co
mpartment has it’s own Inlet and Outlet. Flow into the
aquarium compartment can be adjusted or shut off by turning the Blue tap. It is
important to check daily that a good flow of filtered water is reaching each
aquarium compartment
IMPORTANT!
– DO NOT switch off the taps completely on the same system at
the same time. Doing so will place excess pressure and will damage your
circulation pump.
Water drains out of the aquarium via the black strainer at the back of the tank. It
is important that these are kept clean from debris (daily check). Allowing them to
block up will overflow the aquarium!