27
TM
S-Series Server / Client Manual
Version 2.2.1 Rev 1/14/07
www.cascadiadvrt.com
Setup Mode
Camera Setup (cont.)
Pan / Tilt Setup
4
5
3
2
1
6
1. Pan/Tilt: Select the Pan/Tilt Type (Make/Model) from the drop down list.
2. Out Port: Select the Communication Port from the drop down list which connects
to the converter.
3. RX Address: Select the Address from the drop down list to match the Pan/Tilt
camera.
4. Pan/Tilt Invert: Check to make the Pan/Tilt direction reversed.
5. Zoom In/Out Invert: Check to make the Zoom In/Out reversed.
6. Display RX Button: Check to display the Camera’s Address on the image.
Each camera can be custom configured for specific applications. Camera Setup is
where each camera is programmed to your individual installation. This is the
Pan/Tilt Setup Tab.
