Cascadia PLE1202709, Operation Manual, Page: 20 / 57

www.cascadiadvrt.com / (888) 421-0050
20
TIME&DATE
ADJUSTMENT
It is recommended to check the clock before
installation and put the clock right if it shows
the wrong time.
1. Press “SETUP”.
The SETUP MENU will be displayed on the
monitor.
2. Press “Setup” button again and
No.1,2,3 and P/W window will show
up.
Input the P/W and A/S MENU will be displayed
on the monitor.
4. Move the cursor to “Date & Time”.
Change the GMT and then time & date.
6. Press “ESC” button to go back to
LIVE mode.
DVR will restart and the below warning window
will show up.
NOTE:
The above warning message is to confirm the
changed time.
Select “OK” to confirm the time.
Select “Cancel” to ignore the changed time.
8. Press “ESC” button to exit without
Backup.
Press “ESC” button to exit without Backup
when Backup window shows up.
And then the Live image will be displayed and
the Selected time & date will be applied on the
information bar.
7. Press “OK” button.
Press “OK” to adopt the changed time and
Backup window will show up.
5. Press “OK” button.
Press “OK” button to save the changed time.