Heat Manager Pro User Manual V1.5 Page 44
2.12
E
MERGENCY STOP ACTIVATE
(
ONLY WITH EXTERNAL
DIO
AND SE-
LECTED IN THE INITIAL SETUP
)
During the setup a selection can be made if an extra external DIO is present in the system. This
DIO can be used for signaling alarms and activating a (remotely controlled) emergency stop.
You can use these signals for disabling the power on heating elements, in case a switching re-
lay gets stuck as well as a combination signal of a temperature alarm on one of the channels
and a signal in case one of the channels has a broken thermocouple.
When selected in the setup (see engineering manual for the setup procedure), you see this but-
ton in the bottom of the main menu:
When you push the emergency stop activate button, the following screen will appear:
