BEFORE FIRST USE
•
Your
CASCADE
appliance has been packaged carefully to
ensure the product reaches you in good condition. If the
product has been damaged, dropped, has a malfunction in any
way, or if the supply cord is damaged, immediately contact your
retailer for replacement or repair.
•
Carefully unpack your
CASCADE
appliance. Make sure you do
not discard any packaging material until all parts of the
appliance have been found.
•
Remove any label or sticker. Carefully wipe the exterior of the
appliance to remove any dust that may have accumulated. Dry
with a dry towel. Do not use harsh abrasive cleaners.
WARNING! Do not immerse in water or any other liquids.
OPERATION
•
NOTE: The first time you use this iron, trial it on a piece of old
cloth, to ensure any impurities left inside the appliance from the
manufacturer are removed.
•
Always place the appliance on a heat resistant surface, as the
appliance will reach high temperatures. Use the heel-rest of the
appliance when it is on.
•
WARNING
WARNING
WARNING
WARNING!!!! DO NOT LEAVE ON WHILE UNATTENDED.
•
WARNING
WARNING
WARNING
WARNING!!!! Always leave a gap of approximately 20 cm around
the exterior of appliance when on. Never use near curtains or
other flammable material.
•
WARNING
WARNING
WARNING
WARNING!!!! DO NOT LET SUPPLY CORD HANG OVER THE EDGE
DO NOT LET SUPPLY CORD HANG OVER THE EDGE
DO NOT LET SUPPLY CORD HANG OVER THE EDGE
DO NOT LET SUPPLY CORD HANG OVER THE EDGE
OF ANY BENCH OR
OF ANY BENCH OR
OF ANY BENCH OR
OF ANY BENCH OR TABLETOP. THERE MAY BE A RISK OF
TABLETOP. THERE MAY BE A RISK OF
TABLETOP. THERE MAY BE A RISK OF
TABLETOP. THERE MAY BE A RISK OF
SCALDING OR OTHER INJURY SHOULD YOUNG CHILDREN PULL
SCALDING OR OTHER INJURY SHOULD YOUNG CHILDREN PULL
SCALDING OR OTHER INJURY SHOULD YOUNG CHILDREN PULL
SCALDING OR OTHER INJURY SHOULD YOUNG CHILDREN PULL
THE APPLIANCE FROM THE BENCH OR TABLETOP.
THE APPLIANCE FROM THE BENCH OR TABLETOP.
THE APPLIANCE FROM THE BENCH OR TABLETOP.
THE APPLIANCE FROM THE BENCH OR TABLETOP.
2.
DRY IRON
DRY IRON
DRY IRON
DRY IRON
Your
CASCADE
Iron may be used as a Dry Iron.
•
Plug the power cord into a suitable mains outlet corresponding
to the supply requirements of your appliance, 220-240V
∼
50Hz
– AC only.
•
Select the desired temperature setting on the temperature
control dial. The ‘ power-on’ indicator will glow, indicating
that heating cycle is on. When the appliance reaches the
desired temperature, the indicator light will stop, and the iron is
ready for use. This indicator light will cycle on and off as the
appliance automatically maintains its operating temperature.
STEAM IRON
STEAM IRON
STEAM IRON
STEAM IRON
Your
CASCADE
Iron may be used as a Steam Iron with a ‘ Burst of
Steam Boost and Spray’ function.
•
Place the iron on an angle of approximately 45
°
. Using the cup
supplied, carefully fill the water tank with water to the maximum
level. WARNING
WARNING
WARNING
WARNING! DO NOT OVERFILL. ALWAYS FILL BEFORE
CONNECTING TO THE POWER SUPPLY. When completed press
the water tank cover again to release.
•
Plug the power cord into a suitable mains outlet corresponding
to the supply requirements of your appliance, 220-240V
∼
50Hz
– AC only.
•
Select the desired temperature setting on the temperature
control dial. The power on indicator will glow, indicating that
heating cycle is on. When the appliance reaches the desired
temperature, the indicator light will stop, and the iron is ready
for use. This indicator light will cycle on and off as the
appliance automatically maintains its operating temperature.
3.
