Cascade CE093SM User Manual Download Page 2

BEFORE FIRST USE 

 
1.

 

Your  CASCADE  Sandwich  Maker

 

has  left  the  factory  in 

good  working  order  in  this  carton  for  your  protection. 
Should  the  carton  be  damaged  or  if  the  product  is 
dropped, damaged, has  a malfunction in any way, or if 
the  flexible  cord  is  damaged,  immediately  contact  your 
retailer for replacement or repair. 

2.

 

Carefully  unpack  your  CASCADE  appliance.  Make  sure 
you  do  not  discard  any  packaging  material  until  all 
parts of the appliance have been found. 

3.

 

Carefully wipe the exterior of the appliance with a damp 
cloth  to  remove  any  dust  that  may  have  accumulated. 
Dry with a dry towel. Do not use abrasive cleaners. 

WARNING  Do  not  immerse  in  water  or  any  other 

liquids.  

4.

 

Wash the accessories in  warm soapy water. Dry with a 
dry towel. 

5.

 

The appliance is now ready for operation. 

 

OPERATION 

 

 

Before  using  the  appliance  for  the  first  time,  or  after  long 
periods  of  storage,  clean  the  appliance  thoroughly.  (See 
BEFORE FIRST USE.) 

 

Always place the appliance on a flat, clean and non-slippery 
surface before operating it. 

 

Always  place  the  appliance  on  a  heat  resistant  surface  as 
the appliance reaches high temperatures.  

 

WARNING  always  leave  a  gap  of  approximately  20  cm 

around  the  exterior  of  appliance.  Never  use  near  curtains, 
walls, under cupboards or other flammable materials. 

 

Plug  the  power  cord  into  a  suitable  mains  outlet 
corresponding  to  the  supply  requirements  of  your 
appliance.   

      Mains supply: 230-240V 

50Hz – AC only 

 

Your CASCADE sandwich maker is now ready for use. 

 

Plug  the  sandwich  maker  into  an  AC  power  outlet  and 
ensure  that  the  indicator  light  comes  on  indicating  that 
power is available. 

 

Close  the  sandwich  maker  and  prepare  sandwich  while  the 
appliance is heating. 

 

When the sandwich maker is ready (after about 5 minutes) 
the  indicator  light  will  go  off.  The  green  indicator  will  light 
to indicate the appliance is ready. 

 

Fully open the sandwich maker, place a slice of bread in the 
bottom half with the buttered side against the plate. 

 

Place filling on top of bread. Keep filling about 10mm clear 
of edge of bread so that the out side edges can be sealed. 

 

Place  top  slice  of  bread  with  the  buttered  side  up  and 
carefully close the two parts of the appliance.  Do not force 
the appliance shut as steam may be ejected from between 
the plates risking burning of fingers. 

 

NOTE:    During  toasting  the  indicator  lights  will  cycle  “on” 
and  “off”  while  the  thermostat  keeps  the  sandwich  maker 
at the correct operating temperature. 

 

Your  sandwich  will  take  between  2-5  minutes  to  cook 
depending on filling and required result. 

 

Open the sandwich maker and remove the sandwich.  Use a 
plastic or wooden spatula.  Never use a metal knife as this 
may damage the non-stick coating. 

 

Prepare  further  sandwiches  if  required  whilst  one  is 
cooking.  After use, remove the plug from the wall socket. 

 

NOTE The first time you use your appliance, there may be 

a  small  amount  of  smoke  and  smell.  This  is  normal

It  is

 

due  to  a  protective  coating,  placed  on  the  heating 
elements, to protect the heating elements during shipping. 

 

WARNING Do not touch hot surfaces.  

 
 

CLEANING AND CARING  

 

 

After  use  and  before  cleaning,  remove  plug,  wait  for 
sandwich maker to cool. 

 

Wipe  the  inside  and  edges  of  the  plate  with  absorbent 
paper toweling or a soft cloth. 

 

Should filling be difficult to remove, pour a little cooking oil 
onto the plate and wipe off after 5 minutes, when the food 
has softened. 

Reviews: