3
6914838 EN
FP2955.eps
IN0016.eps
OPERATION
Safety Rules – Handling Loads
SIDESHIFTING &
FORK POSITIONING
A
Sideshift Left
B
Sideshift Right
C
Open Forks (if equipped)
D
Close forks (if equipped)
Limit truck movement
with raised load.
Top of load should
not extend above
backrest.
Load weight must not exceed combined
truck/attachment capacity (see truck
nameplate).
Total fork capacity (LH + RH fork) must
be greater than load weight. Check
capacity stamp on forks.
CAUTION: Do not put
side loads on forks.
Center load prior
to traveling.
Limit sideshifting
with raised load.
LOAD
WEIGHT
B D
C
A
GA0005.eps
Hoist down Tilt forward
Hoist up Tilt Back
Sideshift & Fork Position Operation
Raise load prior
to sideshifting.
B
C
A
C
D
D
AUXILIARY VALVE
FUNCTIONS
WARNING:
Truck control handle and attachment
function activation shown here conforms to ISO
3691 recommended practices. Failure to follow
these practices may lead to serious bodily injury
or property damage. End user, dealer and OEMs
should review any deviation from the practices
for safe operation.
Summary of Contents for 100R
Page 17: ...Blank...
