6047782-R2 EN
11
11
FP0902.eps
12
FP0832.eps
FORK LOWER HOOKS, CARRIAGE
OK
OK
OK
UPPER CARRIAGE BAR
FORK UPPER HOOKS
Wear
Gauge
Right Fork
Flow Control
Inspect fork hooks and carriage bars
NOTE:
Use Go/No-Go Wear Gauge part no. 209560
(Class II) or 209561 (Class III).
A
Inspect the fork lower hooks and carriage bar.
If the gauge fits between the carriage bar and
lower hook, repair or replacement is needed.
B
Inspect the upper carriage bar. If the gauge
arrow touches the carriage bar, repair or
replacement is needed.
C
Inspect the fork upper hooks. If the gauge
arrow touches the hook, repair or replacement is
needed.
Adjust valve flow controls for equal
fork movement (if required)
NOTE:
Attachment is Factory-adjusted for equal
fork movement when operated at recommended
pressure and flow rate.
A
Open forks fully, then close. Look for unequal
fork movement and note which cylinder is faster.
B
On faster fork (one that bottoms first), loosen
jam nut and screw flow control in (CW) 1/2-turn.
C
Repeat Step B until fork movement is equal.
Tighten jam nut.
Left Fork
Flow Control
Valve pressure
adjustment
INSTALLATION