39
|
P a g e
cascadesciences.com
|
Tel. 503 847-9047
OPERATION
Note:
There may be
light smoking
from protective oil coatings on the elements when running the
oven near its maximum temperature for the first time.
P
UT THE
O
VEN INTO
O
PERATION
Verify all required procedures in the Installation chapter have been completed before beginning.
Continued next page
1
2
Plug in the Power Cord
Attach the power cord that came with the unit to the power inlet
receptacle on the back of the oven.
Plug the power cord into the workspace electrical supply.
3
Verify the vacuum and vent valves are both closed
Always verify the oven chamber is sealed prior to starting the oven.
•
This helps safeguard your vacuum pump from prolonged
and possibly damaging exposure to streaming atmosphere.
4
Turn on the oven
Place the oven
Power Switch
in the ON ( I ) position.
•
The oven temperature display will illuminate.
•
Any vacuum pump connected to the accessory power
outlet will turn on.
5
Plug in the vacuum pump
Plug the vacuum pump power cord into a wall power source.
Summary of Contents for CVO-2
