cascade corporation 782008-R3, Operator'S Manual, Page: 2 / 12

i
782008-R3 EN
ONTENTS
WARNING: Rated capacity of the truck/
attachment combination is a responsibility
of the original truck manufacturer and may
be less than shown on the attachment
nameplate. Consult the truck nameplate.
WARNING: Do not operate this attachment
unless you are a trained and authorized lift
truck driver.
C
Introduction i
Safety Rules 1
Daily Inspection 3
Fork Installation 4
Attachment Operation 5
Load Handling 6
Pickup and Transport 6
Rotating 7
Rotator with Bin Retainer 8
Safe Operation and Maintenance 9
OSHA Regulations 9
CAUTION:
This guide shows load handling procedures for
most products. Ask your company or organization about
any special procedures for the loads you may be handling.
NTRODUCTION
Rotators
–
Cascade Rotators are designed to tip and
dump a wide variety of fork loads.
About this Guide – This guide is prepared to simplify
your understanding about efficient and safe Rotator
use and operation. Please read the guide thoroughly
before operating the attachment. Be sure you know
and understand all operating procedures and safety
precautions. If you have any questions, or don't
understand a procedure, ask your supervisor.
Emphasize Safety! Most accidents are caused by
operator carelessness or misjudgement. You must watch
for hazardous situations and correct them.
I
RR0086.eps
RR0088.eps
180° Rotation
360° Rotation
360° Rotation with
Bin Retainer
RR0678.eps