Use Audio Cables to
connect Room outputs
to amplifier RCA inputs
To Speakers
OR
Connect to Amplifier(s)
Connect to LAN
and Power
Network Cable
Power Cable
Optional:
Keypads & Trigger input
USB Cable
(Included with
Keypad Hub)
Keypad Hubs
Keypads, up to 6 per Hub
(stainless faceplate optional)
Cat5 or better cable,
not included
Connect external audio devices into
Inputs.
Digital Output can be connected to any
AVR or other digital optical input.
Connect Trigger
1 output to the
trigger input on
the amplifier
Connect Doorbell or
other 12VDC signal
to Mute/Page input
Move the Remote Turn
On switch to “Trigger”
Make sure all
ZONEs are set as
illustrated (VOL
at 1 O’Clock, BUS
switches to LINE
IN and ZONE
switch set to ST)