CASATELLI Filippo 12 E1C, Manual

Page: 47 / 156

47 004778350 - 16/07/2020
E
N
G
L
IS
H
8 HOME PAGE CONFIGURATION
operation.
Before starting, the stove must be powered on by pressing the safety switch on the back:
a) Use the arrow keys to go to the set-up menu and press the key;
b) Select the password “7” with the key;
c) Scroll with the keys and select the submenu
[30]
; “
--0
d) Press the key and enter the value “54” with the keys;
e) Press
f)
g) To modify, press the
keys;
h) Press
TWO DIFFERENT CONFIGURATIONS CAN BE SET :
CONFIGURATION 1 (default)
The stove will modulate the power according to the ambient temperature read by the probe on board.
set room temperature.
CONFIGURATION 2
8.1 CONNECTION TO AN EXTERNAL THERMOSTAT
The stove can be connected to a thermostat or chronothermostat.
The external thermostat must be connected to the relevant terminals on the electronic board which are jumpered
in the factory. Disconnect the jumper, therefore, and connect the two thermostat contacts in its place.
It is important to set the stove to
the chronothermostat is in the “called” state. This operation is also necessary in the event of a power failure or
To avoid overlapping operating time bands, we recommend disable the stove timer (set to OFF).