6
7
www.DeubaXXL.de
www.DeubaXXL.de
Important:
Do not stand or sit on tables. Keep small parts out of the reach of children.
When unpacking, be sure to keep plastic bags and other packaging materials away from
children! Danger of suffocation!
Tip for stain removal
: Avoid machine washing! First, try to wash out the stain with
lukewarm soapy water. Do not use hard brushes or aggressive cleaning agents that can
damage the water-repellent protective layer of the cushion or support.
Assembly Instructions
Please note that the screws must first be inserted by hand, and then
slightly tightened so that the screw is held in place and the components
are firmly fastened.
Screws must not be tightened until all parts are connected in this way.
By subsequently tightening the screws, small deviations in the drill
holes or welding points that can occur with hand-made products can be
compensated for.
Do not use any power tools to assemble this product. The excessive force
of a power tool can cause screws to be overtightened and thus no longer
hold.
Always insert the hexagonal wrench completely into the recess provided
in the screws.
Make sure this product is fully assembled before usage, as shown in the
illustration. Ensure that all legs are in contact with the floor and that
your product is securely placed on the floor. Check that all screws and
bolts are tight and inspect them regularly.
Do not overtighten the screws, overtightened screws can damage the
material and cause cracking.
Keep away from small children, risk of injury!
Wood
This product is subject to strict tests and standards complying with EU directives so that
we can offer you a product that does not pose any health risk. Nevertheless, there may
be slight odors, but this does not mean that you will be at risk. It is advisable to assemble
the product in a well-ventilated environment. After the product has been removed from
the packaging, the smell will vanish after a short time.
Make sure that the wooden parts are washed with lukewarm water and light soapy wa-
ter before assembly to remove wood dust and any excess oil or pre-treatment residues.
Rub the parts well dry and allow your product to dry for about 1 day before assembly.
Treat with fine sandpaper and clean as described above before re-oiling. Then treat with
a suitable hardwood oil from a specialist store and follow the instructions on the pack
-
aging. Before putting into operation, check whether the wood has discolored and all oil
residues have been successfully removed. Do not place wooden furniture directly on
the lawn or porous surfaces. Moisture from soil and grass can lead to mildew or the like
and damage your furniture despite oiling. Hardwood furniture should not stand perma-
nently in the rain. If you have purchased an oil with color pigments, the pigments may
be washed out of the protective oil. We assume no liability resulting from dirty surfaces.
Note: Crackling when first placed on e.g. benches is quite normal, the additional wood
glue dissolves. This will happen only once for each lath and should not be a cause for
concern.
Maintenance advice: Natural hardwood products must also be oiled regularly, at least
twice a year. Greying and small cracks in natural products are a normal process and no
reason for complaint. Regular oiling of your natural product delays this process. If you
follow the care instructions, you will be enjoying your new natural product for a long
time.
Protect your product from rain and weather effects. Store your product in a dry and
protected place during periods of frost and winter. We recommend using a suitable
protective cover! You can find it in our Online Shop.
If you do not carry out regular care and maintenance, the service life of your product
will be considerably reduced. We cannot accept any liability for consequential damage
resulting from lack of maintenance and care.
