FITTING THE ACCESSORIES
-Unplug the appliance from the
mains.
-Place the blade into the saw
blade holder (I)
-Push the blade as far as it can
go and it wil be fixed.
-Run the jig saw under no load to
check that the blade is secu-
re before using it to cut any
materials.
-NOTE: It’s always better if you
push the blade clamps along
with the blade in order to mount
it.
DUST BLOWING SYSTEM (M):
-The appliance is equipped with
a blowing system to keep the
view line clean. Also, it has a va-
cuum cleaner adapter which can
be used with the dust blower
function off.
-To activate it, push the Dust
blower switch to the right.
-To deactivate it, place the dust
blower switch to the left.
USE:
-Unroll the cable completely
before plugging it in.
-Connect the appliance to the
mains.
-Turn the appliance on, by using
the Start-up switch.
-NOTE: The tool is equipped
with a lock on button. It can be
activated by pushing the lock
on button (B) to one side while
pushin the start-up button (A).
To deactivate it simply pres de
start-up button again (A).
ELECTRONIC SPEED CON-
TROL:
-The speed of the appliance can
be regulated by using the speed
regulator control (S). This func-
tion is very useful, as it makes it
possible to adapt the speed of
the appliance to the type of work
that needs to be done.
PENDULAR FUNCTION
-This appliance is equipped with
a pendular system.
-To activate it turn the pendular
regulation lever to the position
(1, 2, 3), 1 for minimum and 3
for maximum.
-To deactivate it turn the pendular
regulation lever to the position 0.
-Recommendations:
-Use no pendulum function for
metal, plastic sheets, fine cutting
edges.
-Use position 1 for cutting hard
wood, plastics
-Use position 2 for cutting wood,
fine edges on wood
-Use position 3 for cutting wood if
no fine edges are required.
LIGHT & LASER FUNCTION:
-The appliance includes a light &
laser function, which illuminates
the working area and shows a
straight line under the appliance.