Casals LM1600EA Manual Download Page 5

(Check immediately).

• If the machine starts to vibrate abnor

-

mally:
- Immediately inspect for damage,
- replace or repair any damaged parts,
- check for and tighten any loose parts.

4. Maintenance and storage

• Keep all nuts, bolts and screws tight 

to ensure the machine is in safe working 
condition.

• Check the grass collector frequently for 

wear or deterioration.

• During adjustment of the machine be 

careful to prevent trapping your fingers 
between moving blades and fixed parts of 
the machine.

• Always allow the machine to cool down 

before storing.

• When servicing the blades be aware that, 

even though the power source is switched 
off, the blades can still be moved.

• Replace worn or damaged parts for 

safety. Use only genuine replacement parts 
and accessories.

WARNING

• This appliance is not intended for use by 

persons (including children) with reduced 
physical, sensory or mental capabilities, or 
lack of experience or knowledge, unless they 
have been given supervision or instruction 
concerning use of the appliance by a person 
responsible for their safety.
Children should be supervised to ensure that 
they do not play with the appliance.

• This Lawn Mower is designed for the cut

-

ting of domestic grass and lawns.

• The Lawn Mower must be fully assembled 

before connecting to the power supply.

• When using wear robust footwear and 

suitable outdoor clothing.

• Never put your hands into the underside 

of the cutting area when the Lawn Mower is 

turned on.

• Keep the flexible supply power cable 

(cord) away from the blades.

• Before use check the supply power cable 

(cord) for signs of damage or ageing.

• Never operate the appliance with damaged 

guards or without the guards in place.

• Danger! The cutting blade rotates for 

some time after the motor has been turned 
off.

• Never start the Lawn Mower when it is 

lying on its side.

• When operating always adopt a safe 

stance and hold the Lawn Mower firmly, 
away from your body keeping hands and 
feet safely away from the cutting head.

• Thoroughly inspect the area to be mown, 

remove all stones, sticks, string, wire and 
any other objects that could hinder your 
mowing.

• Always be aware of your footing when 

mowing on slopes.

• Mow across the face of slopes, never up 

and down.

• Use extreme caution when changing 

direction on slopes. Be aware of the cable 
position.

• Do not mow excessively steep slopes 

where keeping a good footing is difficult.

• Use extreme caution when reversing or 

pulling the mower towards you.

• Make sure that the power cable is always 

behind the Lawn Mower and away from the 
cutting path of the mower.

• Do not use the Lawn Mower in the rain; 

never leave the mower out in the rain.

• Avoid mowing wet grass if possible.
• Never pick up or carry the mower while it 

is switched on.

• Always turn off the mower and wait for the 

cutting blades to stop rotating before moving 
from one area to another.

• Always turn off and disconnect from the 

power supply before attempting any clean-

Summary of Contents for LM1600EA













Reviews: