background image

31

CV072018-1

SERVICE DATA

8502

BAUD RATE

(100 bit/s)

RW

DEFAULT=96

8503

TIMEOUT

(sec.)

RW

TIME OF DISCONNECTION BY
DEFECT = 10 SEG.
65535 DISABLED THE CONNECTION IN
CASE OF ABSENCE OF READING
THE REGISTERS

8559

PASSWORD

RW

INSTALLER: 5678 ENTER
FOR MODIFICATIONS MENU
INSTALLER

INSTALLATION

The installation must be carried out by specialized personnel. For optimal operation, the remote panel should be fixed to an internal wall at an 
approximate height of 1.5 m from the ground, away from heat sources (radiators, stoves, etc.) and should not be exposed to sunlight direct It 
should not be installed near doors that could damage the electronics when they closed.

WIRING CONTROL PANEL

Connect the power to the terminals indicated with 24V and G respecting the correct polarity. Connect the BUS to the terminal indicated with S. 
The use of a shielded cable with sections of at least 0.3 mm is recommended. In case of communication errors, check the connections between 
the remote panel and the electronic card. Always use a shielded at least 3x0.3mm cable for a possible RS485 card.

CONTROL FEATURES

Power supply: 9/30 VDC 250mW, working temperature between 0 and 50 ° C; storage temperature between -20 ° C and 70 ° C.

WARRANTY CONDITIONS

The warranty period of 2 years (24 months) begins with the receipt of the device, the date of receipt must be checked on the purchase invoice. 
In the period covered by the warranty, the manufacturer repairs all defects arising from manufacturing errors or material defects free of charge. 
At its discretion it will replace defective parts or entire appliances. Any other request for guarantee services is excluded. The manufacturer also 
declines all responsibility for subsequent damages.
The material claimed as defective must be sent to the manufacturer through the distributor, accompanied by the detailed description of the 
defect completed by the distributor. The customer is responsible for shipping the goods. The repair is sent by the manufacturer. In no case 
does the manufacturer respond for defects caused by improper use not in accordance with the manual of use provided and by natural events 
such as lightning, floods, earthquakes, fires, etc. It also declines any responsibility for repairs or modifications made to the devices by people 
outside the manufacturing company.

Remote panel: rear view

Tcp-ip connection / additional card

Summary of Contents for CTRL-MAX2


































Reviews: