Casals CPBLI20K2, Instructions Manual, Page: 3 / 74

3
Cordless Drill
CPBLI20K2
Dear Customer,
Many thanks for trusting to Casals Professional.
Thanks to its continuous effort, our innovation and
the strictest quality controls, Casals Professional
develops electric Power Tools for the toughest
jobs.
GENERAL POWER TOOLS SAFETY WARNING
WARNING Read all safety warnings and
all instructions, illustrations and specifica-
tions provided with this power tool.. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury
Save all warnings and instructions for future
reference
The term “power tool” in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
Work area safety
- Keep work area clean and well lit.
Cluttered or
dark areas invite accidents.
- Do not operate power tools in explosive at-
mospheres, such as in the presence of flam-
mable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
- Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
- Power tool plugs must match the outlet. Nev-
er modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools.
Unmodified plugs and matching outlets will
reduce risk of electric shock.
- Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of elec-
tric shock if your body is earthed or grounded.
- Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
- Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts.
Damaged or entangled cords in-
crease the risk of electric shock.
- When operating the power tool outdoors, use
an extension cord suitable for outdoor use.
Use a cord suitable for outdoor use reduces the
risk of electric shock.
- If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply .
Use of an RCD reduces
the risk of electric shock.
Personal safety
- Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or medi-
cation.
A moment of inattention while operating
power tools may result in serious personal injury.
- Use personal protective equipment. Always
wear eye protection .
Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriated condi-
tions will reduce personal injuries.
- Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
the power source and/or battery pack, picking
up or carrying the tool.
Carrying power tools
with your finger on the switch or energizing power
tools that have the switch on invites accidents
- Remove any adjusting key or wrench before
turning the power tool on.
A wrench or a key left
English ORIGINAL instructions