7
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.- Fully unroll
the appliance’s power cable before each use.
- Check the position of power cables before commenc-
Check the position of power cables before commenc-
ing work ensuring they are well away from the work
area.
- Keep hands and other body parts well away from the
work area whist the tool is in use.
- Keep hands and other body parts well away from the
discs while the angle grinder is in use. Do not attempt
to remove cut material whilst the angle grinder is in op-
eration or reach underneath for any reason.
- Do not use the appliance if the parts or accessories
are not properly fitted.- Do not use the appliance if the
accessories or consumables attached to it are defec-
tive. Replace them immediately.
- Use the appliance handle/s, to catch it or move it.
- Unplug the appliance from the mains before replacing
any accessory.
- Unplug the appliance from the mains when not in use
and before undertaking any cleaning task.
- This appliance is for professional use.
- This appliance is intended for adult use. Ensure that
this product is not used by the disabled, children or
people unused to its handling.
- This appliance is not a toy. Children should be super-
vised to ensure that they do not play with the appliance.
- Take special care about discs and tools, they may be
stored fixed on the appliance and used according to the
manufacturer’s instructions.
- Do not use separator or reducing bushings, adapters
to fix the discs / tools they are not directly compatible
with the appliance.
- Do not use cutting discs on deburring operations.
- Do not expose to extreme temperatures or strong
magnetism.
- Keep the appliance in a dry, dust-free place, out of
direct sunlight.
- Always check the workpiece before operation and re-
Always check the workpiece before operation and re-
move any obstructions such as nails, staples, screws,
string, rags, cloths and other debris.
- Before cutting ensure there is a suitable gap below
the workpiece to prevent the disc from touching any
obstacles.
- Only use the appliance for carrying out dry tasks.
- Never rest the appliance into a surface while in use.
- Do not use the appliance on any part of the body of
a person or animal.
- Let the appliance running with no load for 30 sec-
onds in a safe position. If you notice serious vibration
or other defects stop the appliance immediately. Then
check the problem and /or proceed as we describe on
Anomalies and Repair clause.
Product description and Specifications
Description:
A
Start-up switch
B
Auxiliary handle
C Disc protector
D. Ventilation openings
E
Spindle blocking button
F
Spindle
H
Support plate
I
Disc (not included)
J
Clamping nut
K
Tightening key
L
Collard of guard
M Bolt
Instructions for use
Before use:
- Make sure that all the product’s packaging has been
removed.
- Before connecting the power cord to the mains power
supply ensure the switch is in the off position.
- Ensure the auxiliary handle is fitted correctly before
use.
- Prepare the appliance according to the function you
wish to use:
Fitting safety devices
Fitting the disc guard (Fig.5)
- Never use the machine without guard. Keep guards
in place.
- The guard should be positioned so the closed side of
the guard points towards the operator.
- Unplug the appliance from the mains.
- Fit the collar of the guard (L) on the flange of the ap-
pliance.
- If the guard doesn’t fit in the flange, loosen the bolt
(M).
- Turn the guard to the desired working position.
- Tighten the screw (M) in a clockwise direction.
Fitting the auxiliary handle
- Unplug the appliance from the mains.
Use of the auxiliary handle is obligatory in order to
ensure greater control and safety when handling the
tool. The auxiliary handle (B) must be screwed on to
the right or left side, depending on the type of work to
be carried out.
Fitting the accessories
- Unplug the appliance from the mains.
- If any of the appliance casings breaks, immediately
disconnect the appliance from the mains to prevent the
possibility of an electric shock.
- Do not use the appliance if it has fallen on the floor,
if there are visible signs of damage or if it has a leak.
- CAUTION: Maintain the appliance dry.
- Do not use the appliance with damp hands or feet, or
when barefooted.
- Do not wrap the power cord around the appliance.
- Do not clip or crease the power cord.
- Check the state of the power cord. Damaged or tan-
gled cables increase the risk of electric shock.
- Do not touch the plug with wet hands.
- Ensure that the resulting sparks not become danger-
ous, for example, that they don’t reach people or ignite
flammable substances.
- Secure the workpiece. A workpiece clamped with
clamping devices or in a vice is held more secure than
by hand.
-
When using the angle grinder make sure that the
workpiece is securely clamped to a work bench or vice.
- When working with the machine, always hold it firmly
with both hands and provide for a secure stance. The
power tool is guided more secure with both hands.
- Before using the appliance check the working speed
shown in the disc/ tool is equal or greater than the ap-
pliance’s speed.
- Before using the appliance check the disc / tool di-
mensions are compatible for this appliance.
- Before using the appliance ensure that the disc / tool
is properly fixed in place.
- Allow the angle grinder to reach it’s optimum speed
before commencing work
- Apply the machine to the workpiece only when
switched on and switch the machine off only after it has
been lifted away from the workpiece. The power tool
can move suddenly.
- Apply the machine to the workpiece only when
switched on. Otherwise there is danger of kickback
when the cutting tool jams in the workpiece.
- Do not touch any of the appliance’s moving parts
while it is operating.
- Do not grind any material containing asbestos. Work-
ing with asbestos and/or silica wheel, the dust pro-
duced is harmful for health. Prevent inhalation of these
types of dust by following the appropriate health and
safety regulations.
- Do not touch the grinding disc after operation. The bit
will be HOT and will burn!
- Exercise precaution after employing the stop opera-
tion on the appliance as the tool will continue moving
from the effect of its own mechanical inertia.
- Always wait until the machine has come to a complete
