background image

SAFETY INSTRUCTIONS
WARNING:  When using power tools or garden 
power tools basic safety precautions including 
the following safety instructions should always 
be followed to reduce the risk of fire, electric 
shock and personal injury. Read all these in-
structions before operating this product and 
retain these instructions for future reference.

•Do not operate this product in an explosive  
atmosphere, such as in the presence of flam-
mable   liquids, gases or dust. 
•Keep children and bystanders away while op-
erating the power tools or garden power tools. 
Distractions can cause you to lose control.
•Power tools or garden power tools plug must 
match the outlet. Never modify the plug in any 
way. Do not use any adapter plugs with earthed 
(grounded) power tools. Unmodified plugs 
and matching outlets will reduce risk of electric 
shock
•Avoid body contact with earthed or grounded 
surfaces such as tubes, radiators and refrigera-
tors. There is an increased risk of electric shock 
if your body is earthed or grounded.
•Do  not  expose  power  tools  garden  power 
tools to rain or wet conditions. Water entering a 
power tool garden power tool will increase the 
risk of electric shock.
•Do  modify  or  change  the  cord.    Never  use 
the cord for carrying, pulling or unplugging the 
power tool. Keep the cord away from heat, oil 
and  sharp  edges  or  moving  parts.  Damaged 
or entangled cords increase the risk of electric 
shock.
•When operating this power tool outdoors, use 
an extension cord suitable for outdoor use. Use 
of a cord suitable for outdoor use reduces the 
risk of electric shock.
•Stay alert. Watch what you are doing and use 
common sense when operating the power tool 
or garden power tools. 
•Do  not  operate  the  power  tools  or  garden 
power tools when you are tired or under the in-
fluence of drugs, alcohol or medication. 
•Use safety equipment. Always wear eye pro-
tection. Safety equipment such as dust mask, 
non-skid safety shoes, hardhat, or hearing pro-
tection used for appropriate conditions will re-
duce personal injuries.
•Remove  any  adjusting  key  or  wrench  before 
turning power tools or garden power tools on. 
A wrench or a key left attached to a rotating part 
of power tools or garden power tools may result 

EXPLANATION FOR SYMBOLS

A Class II or double insulated electrical appli-
ance is one which has been designed in such a 
way that it does not require a safety connection 
to electrical earth. The basic requirement is that 
no  single  failure  can  result  in  dangerous  volt-
age becoming exposed so that it might cause 
an electric shock and that this is achieved with-
out relying on an earthed metal casing. This is 
usually achieved at least in part by having two 
layers  of  insulating  material  surrounding  live 
parts or by using reinforced insulation

Read instruction manual before operating or at-
tempting any maintenance work.

   

Switch off and remove the plug from the mains 
before cleaning or maintenance.
       

     
DO NOT leave or use this appliance in the rain. 
 
  

Wear hearing and eye protection.

Keep Bystanders away.

Summary of Contents for BS76-810







Reviews: