Casablanca Riello 59119 Installation Manual Download Page 16

www.CasablancaFanCo.com

1.888.227.2178

Maintenance & Cleaning

Cleaning the fan

 - use soft brushes or cloths 

to prevent scratching. Cleaning products may 

damage the finishes.

Be sure to turn off 

power to the fan 

before performing 

any maintenance or 

relamping.

OFF

Turn P

ow

er

Casablanca fans have the power to cut your cooling 

costs up to 40%.

Beat the High Cost of Cooling

The air movement created by a Casablanca ceiling 

fan lets you set your thermostat higher and still stay 

comfortable. Every degree you raise the thermostat 
saves up to 7% on energy costs. So, you can cut back on 
expensive air conditioning ... and save up to 40%* on
cooling. In winter, your Casablanca fan recirculates warm 
air and saves up to 10%* on heating bills.
* On average at low speed settings. Your savings may 

vary based on climate, building type and thermostat 

setting.

Save Energy and Money While Protecting 
the Environment 

Congratulations! You’re saving energy and money while 

protecting the environment by purchasing this ENERGY 

STAR qualified Casablanca ceiling fan! With this purchase, 
you are doing your part to protect the environment.
Your new ceiling fan has earned the ENERGY STAR label
because it meets high energy efficiency specifications 
set by the Environmental Protection Agency (EPA). 
ENERGY STAR labeled ceiling fans save energy because 
they have more efficient fan motors and air delivery due 
to more aerodynamic blade configurations. Ceiling fan 
models bearing the ENERGY STAR label move air

 

14 - 20% more efficiently than typical ceiling fan models.
For more information on ENERGY STAR, visit

 

www.energystar.gov.

16

M8519-01 • 06/13/14 • © Casablanca Fan Company

Summary of Contents for Riello 59119


















Reviews: