background image

www.CasablancaFanCo.com

1.888.227.2178

10

Turn the splices upward and push them carefully back through the hanger bracket 

into the outlet box. Spread the wires apart, with the grounded wires on one side of 

the outlet box and the ungrounded wires on the other side of the outlet box.

Refer to CAUTION c.1 on pg. 2 

Wiring (continued)

Using the orange wire connectors 

from the       hardware bag:

• 

Connect the black (ungrounded) 

wire from the ceiling to the black 

wire from the receiver.

• 

Connect the white (grounded) 

wire from the ceiling to both the 
white wire from the receiver and 

the white wire from the fan. 

FR

OM RECEIVER

black

blue

yello
w

blue 

Using the orange wire connectors

 

from the remote control hardware bag:

• 

Connect the yellow wire from 
the receiver to the black wire 

from the fan. 

• 

Connect the blue wire from the 

receiver to the blue wire (or 

possibly black with white stripe 

wire) from the fan.

FROM FAN

FRO

M RECEIVE

R

 

FR

OM CEILING

black 

(ung

rounded)

whit

e (g
rounded)

black

whit

e

FRO

M FAN

white

M8539-01 • 01/12/16 • © 2016 Casablanca Fan Company

Summary of Contents for M8539-01





















Reviews: