background image

www.CasablancaFanCo.com

1.888.227.2178

Wiring

Turn the splices upward and push them carefully back through the hanger bracket 

into the outlet box. Spread the wires apart, with the grounded wires on one side of 

the outlet box and the ungrounded wires on the other side of the outlet box.

Refer to CAUTION c.1 on pg. 2 

 

 

FR

OM

 CEILING BRA

CK

ET

FR

OM CEILING

FR

OM CEILING

FRO

M FAN

Gr

een/Y

ello
w S
tripe

 

(gr
ounding)

Gr

een/Y

ello

Stripe

Green/Yellow 

Stripe

Note: 

To connect the wires, 

hold the bare metal leads 
together and place a wire 

connector over them, then twist 

clockwise until tight.

FROM FAN

Using orange wire 

connectors from 

the        hardware bag,     

connect the black wire 

(ungrounded) from 

the ceiling to the black 

wire from the fan. 

Connect the white wire 

(grounded) from the 

ceiling to the white wire 

from the fan.  

Using an orange wire 

connector from 

the        hardware bag, 

connect the three 

grounding wires 

(green, green/yellow 

stripe, or bare copper) 

coming from the ceiling, 

downrod, and hanging 

bracket. 

 

Black 

(ungrounded)

White 

(grounded)

Whit

e

Black

9

M8517-01 • 11/11/13 • © Casablanca Fan Company

Summary of Contents for M8517-01
















Reviews: