background image

www.CasablancaFanCo.com

1.888.227.2178

Maintenance & Cleaning

Hunter fans have the power to cut your cooling costs up 

to 40%.

Beat the High Cost of Cooling

The air movement created by a Hunter ceiling fan 

lets you set your thermostat higher and still stay 
comfortable. Every degree you raise the thermostat 

saves up to 7% on energy costs. So, you can cut back on 
expensive air conditioning ... and save up to 40%* on

cooling. In winter, your Hunter fan recirculates warm air 

and saves up to 10%* on heating bills.
* On average at low speed settings. Your savings may 

vary based on climate, building type and thermostat 
setting.

Save Energy and Money While Protecting 
the Environment 

Congratulations! You’re saving energy and money while 
protecting the environment by purchasing this ENERGY 

STAR qualified Hunter ceiling fan! With this purchase, you 

are doing your part to protect the environment. In 2010, 

ENERGY STAR qualified ceiling fans are projected to cut 

air pollution by more than 500 million pounds!

Your new ceiling fan has earned the ENERGY STAR label
because it meets high energy efficiency specifications 
set by the Environmental Protection Agency (EPA). 
ENERGY STAR labeled ceiling fans save energy because 
they have more efficient fan motors and air delivery due 
to more aerodynamic blade configurations. Ceiling fan 
models bearing the ENERGY STAR label move air 14 - 
20% more efficiently than typical ceiling fan models.
For more information on ENERGY STAR visit

 

www.energystar.gov.

Cleaning the fan

 - use soft brushes or cloths 

to prevent scratching. Cleaning products may 

damage the finishes.

Be sure to turn off 

power to the fan 

before performing 

any maintenance or 

relamping.

OFF

Turn P

ow

er

16

M8515-01 • 11/11/13 • © Casablanca Fan Company

Summary of Contents for M8515-01


















Reviews: