background image

www.CasablancaFanCo.com

1.888.227.2178

16

M8510-01 • 10/30/14 • © Casablanca Fan Company

www.CasablancaFanCo.com

1.888.227.2178

16

Operation (continued)

Quickly press the up or down arrow 

to turn the lights off and on. Hold 

the up or down arrow to raise or 

dim the light level. The reverse 

button changes the direction that 

the blades turn. The power button 

turns the fan off and on.

Lights 

Down

Fan  

Speed

Reverse

Battery 

Holder

Fan 

Power

Lights   

Up

Fan 

Speed

 (Low)

(High)

The reverse button on the wall 

control changes the air flow 

pattern.

 In warm weather

, use 

(a) downward air flow pattern.         

In cold weather,

 use (b) upward 

 

air flow pattern.

(a)

(b)

Reverse 

Button

•  Press the fan power button 

off for at least three seconds to 

initiate the Safe-Exit Mode.
•  The lights will flash for visual 

confirmation.
•  The lights will stay on 50% 

brightness for 20 seconds and 

then begin to dim. After a total 

of 30 seconds, the lights will be 

completely off.

Note: 

 For CFL lighting, the lights 

will stay on 100% brightness 

for 30 seconds. After a total of 

30 seconds, the lights will be 

completely off.

The Safe-Exit Program gives 

you about thirty seconds of 

light when you turn the lights 

off to exit the room before the 
lights go out. To use Safe-Exit:

Summary of Contents for M8510-01W



















Reviews: