manualshive.com logo in svg

Casablanca M8508, Owner'S Manual, Page: 11 / 17

Share
Download
Casablanca M8508 Owner'S Manual Download Page 11

www.CasablancaFanCo.com

1.888.227.2178

11

M8508-01 • 06/05/13 • © Casablanca Fan Company

Wiring

 

 

FR

OM

 CEILING BRA

CK

ET

FR

OM CEILING

FR

OM CEILING

FRO

M FAN

Gr

een/Y

ello
w S
tripe

 

(gr
ounding)

Gr

een/Y

ello
w S
tripe

Green/Yellow Stripe

Note: 

To connect the wires, 

hold the bare metal leads 
together and place a wire 

connector over them, then twist 

clockwise until tight.

FROM FAN

Using orange wire 

connectors from 

the        hardware bag,     

connect the black wire 

(ungrounded) from the 
ceiling to the black and 
the blue wires from the 

fan. Connect the white 

wire (grounded) from 

the ceiling to the white 

wire from the fan.  

Using an orange wire 

connector from 

the        hardware bag, 

connect the 3 grounding 

wires (green, green/

yellow stripe, or bare 

copper) coming from the 

ceiling, downrod, and 

hanging bracket. 

Turn the splices upward and push them carefully back through the hanger bracket 

into the outlet box. Spread the wires apart, with the grounded wires on one side of 

the outlet box and the ungrounded wires on the other side of the outlet box.

Refer to CAUTION c.1 and WARNING w.5 on pg. 2 

 

Black 

(ungrounded)

White 

(grounded)

Whit

e

Blue

Black

Summary of Contents for M8508


















Reviews:

No comments