www.CasablancaFanCo.com
1.888.227.2178
Light Kit
Make sure the light kit is securely attached to the
motor housing. Failure to properly secure all three
assembly screws could result in the light kit falling.
Screw three housing assembly screws
from the hardware bag halfway into
the motor housing.
Feed the wires from the bottom of the
fan through the center hole of the light
kit, then wrap keyhole slots around
the screws and twist counterclockwise.
Tighten all three screws securely.
14
M8506-01 • 10/30/14 • © Casablanca Fan Company
