background image

www.CasablancaFanCo.com

1.888.227.2178

Maintenance & Cleaning

ON

Turn P

ow

er

For cleaning the fan, use soft 

brushes or cloths to prevent 

scratching. Cleaning products 

may damage the finishes.

The reverse button on the wall 

control changes the air flow 

direction.

 In warm weather

, use 

(a) downward air flow pattern.         

In cold weather,

 use (b) upward 

 

air flow pattern.

(a)

(b)

Reverse 

Button

     To change the battery, push on 

the battery door to eject it. Remove 

the battery using a small Phillip’s 

head screwdriver. Replace with 

same type battery, making sure 

the (+) side is facing down. Replace 

battery holder and battery door.

Battery

Battery 

Door

Casablanca fans have the power to cut your cooling 

costs up to 40%.

Beat the High Cost of Cooling

The air movement created by a Casablanca ceiling 

fan lets you set your thermostat higher and still stay 

comfortable. Every degree you raise the thermostat 
saves up to 7% on energy costs. So, you can cut back on 
expensive air conditioning ... and save up to 40%* on
cooling. In winter, your Casablanca fan recirculates warm 
air and saves up to 10%* on heating bills.
* On average at low speed settings. Your savings may 

vary based on climate, building type and thermostat 

setting.

Save Energy and Money While Protecting 
the Environment 

Congratulations! You’re saving energy and money while 
protecting the environment by purchasing this ENERGY 

STAR qualified Casablanca ceiling fan! With this purchase, 
you are doing your part to protect the environment.
Your new ceiling fan has earned the ENERGY STAR label
because it meets high energy efficiency specifications 
set by the Environmental Protection Agency (EPA). 
ENERGY STAR labeled ceiling fans save energy because 
they have more efficient fan motors and air delivery due 
to more aerodynamic blade configurations. Ceiling fan 
models bearing the ENERGY STAR label move air

 

14 - 20% more efficiently than typical ceiling fan models.
For more information on ENERGY STAR, visit

 

www.energystar.gov.

M6011-01 • 04/16/15 • © 2012–2015 Casablanca Fan Company

18

Summary of Contents for M6011-01





















Reviews: