I
sotope
®
5
42900-01 • 07/10/13 • © Casablanca Fan Company
FAN INSTALLATION
CEILING HARDWARE
(not to scale)
CEILING MOUNTING PLATE INSTALLATION
Ceiling Mounting Plate
CAUTION:
To reduce the risk of personal injury, use
only the mounting hardware provided
with the approved outlet box to install the
crossbar mounting plate.
Note:
After removing the old fixture, check the outlet
box to ensure that it is supported by a joist or beam
across its upper surface. If not, a 2 x 4 stud must be
installed.
Step 1a.
Carefully feed the ceiling wires through the
center hole of the ceiling mounting plate. Attach the
plate, as shown with ground wire down, to the ceiling
fixture outlet box with the screws provided. Ensure that
the outlet box wires are not pinched by the washers or
between the mounting plate and the ceiling.
Step 1b.
Attach the ceiling mounting plate using:
• Wood (included) screws when securing to support
structure with approved electrical outlet box. Drill
9/64" pilot holes in support structure to aid in securing
ceiling mounting plate with the included hardware.
• Machine screws (provided with the electrical outlet
box) when securing to existing ceiling fan-rated outlet
box. Make sure it is securly installed and is acceptable
for fan support of 31.8 kg (70 lbs) or less.
JOIST
CEILING
WIRING
CEILING MOUNT-
ING PLATE
GREEN GROUND
WIRE
WASHERS
Outlet Box
Screws
(not included)
CEILING FAN
APPROVED
WIRING BOX
Wire Nuts (3)
Phillips
Screwdriver
3" Wood Screws (2)
Washers (2)
