8
BEFORE INSTALLING THE BLADE HOLDERS & BLADES
BLADE HOLDER
INDENTATION
MOTOR
FLYWHEEL
BRASS BLADE HOLDER SCREW
(1 PER BLADE HOLDER)
BLADE SCREW
(3 PER BLADE)
CUP WASHER
(3 PER BLADE)
Step 8a. Commodore Post Style
Attach the blades to the blade holders
with the three countersunk blade
screws and cup washers provided for
each blade.
Hand
tighten securely.
Insert the blade holder shaft into the
motor flywheel so that the notch lines
up with the brass blade holder screw.
Hand
tighten securely.
BLADE
BLADE
HOLDER
PAIRS OF
BLADE
HOLDER
HOLES
THREADED
DIRECTLY
INTO THE
MOTOR
USE
ROUND
HOLES
FOR 5
BLADES
Direct Drive
Blade holders attach directly to the motor unit.
XLP Motor
Blade holders attach to a flexible flywheel.
BLADE
SWITCH
HOUSING
DIRECT
DRIVE
MOTOR
XLP MOTOR
BLADE
HOLDER
SWITCH
HOUSING
FLYWHEEL
Step 8.
Check your fan and identify if it is a Direct Drive or XLP Motor.
BLADE HOLDERS & HARDWARE
STANDARD STYLE
BLADE SCREW
(3 PER BLADE)
BLADE HOLDER SCREW
(2 PER BLADE)
FIBER WASHER (NOT
INCLUDED IN DAMP
LOCATION FANS)
BADGE STYLE
BADGE
BLADE HOLDER SCREW
(2 PER BLADE)
CENTER STYLE
STEEL WASHER
BLADE SCREW
(4 PER BLADE)
COMMODORE STYLE
BLADE SCREW
(3 PER BLADE)
BLADE SCREW
(4 PER BLADE)
BLADE HOLDER SCREW
(2 PER BLADE)
CUP WASHER
COMM0DORE BLADE HOLDER & BLADE INSTALLATION
