14
15
C
onCert
B
reeze
OPERATING THE REMOTE CONTROL (LIGHT/SPEAKER)
CHANGING THE CHANNEL ON THE MAESTRO™ AND CONCERT BREEZE
Step 7. Install the included 3-volt battery into the transmitter.
This product includes one 3-volt type CR2025 battery for use with the remote control transmitter. Please
contact your local battery recycling center for proper battery disposal information.
Light:
Pressing the ON/OFF button on the remote once will turn the light
on and pressing the button again will turn the light off.
Press to increase the brightness of the light.
Press to decrease the brightness of the light.
Speaker:
Pressing the MUTE button on the remote once will turn the speaker
on and pressing the button again will turn the speaker off.
Press to increase the VOLUME of the speaker.
Press to decrease the VOLUME of the speaker.
Pressing the will switch the surround sound function between:
R
Right Channel
L
Left Channel
M
Mixed Channel
LED Indicators
LED Indicators
CH
R/L/M
Channel 1
Channel 2
Channel 3
Channel 4
LED Indicators
Channel
Selection
Switch
Maestro™
NOTE:The Maestro™ transmitter and the light kit
must be on the same channel to transmit and receive
properly.
Step 1. To change the channel on the Maestro™,
slide the channel selection switch on the lower right
corner of the transmitter.
Step 2. To change the channel on the fan press
the button on the remote.
Step 3. The green/red LED indicators on the bottom
of the fan display the channel the fan is tuned to.
Green LEDs indicate a good signal and red LEDs
indicate no signal.
CH
R/L/M
