9
LIGHT KIT BASE WIRING
WIRE NUT
Step 14.
Remove the wire nuts on the BLACK
and WHITE wires from the fan. If necessary re-
move the insulation from the last
1
/
2
” of each
wire (fan and light fixture).
Step 15.
Attach the switch housing wires to
the light fixture wires by placing the bare ends
of the wires together and then securing with a
wire nut. Connect in this order:
• WHITE wire from fan to WHITE wire from
light fixture. Secure with wire nut.
• BLACK wire from fan to BLACK wire from
light fixture. Secure with wire nut.
Inspect each wire nut and ensure that no bare
wire is visible; pull on each wire to test the
connection is mechanically sound.
INSTALL LIGHT KIT BASE
Step 16.
Slide the light kit base over the
switch housing, assuring that no wires are
pinched. Align the slots in the light kit
base with the holes in the switch hous-
ing and thread the three screws removed
in Step 13, but do
not
tighten.
Align the edges of the light kit with the
edges of the fan body, hold firmly, and
tighten the screws securely by
hand
only.
C
ATHAY
™
CAUTION: When handling the light kit,
do not place pressure against the glass
panels. Hold and manipulate light kit
by its edges.
CAUTION: When handling the light kit,
do not place pressure against the glass
panels. Hold and manipulate light kit
by its edges.
Note:
Make sure the edges of the light
kit are aligned with the edges of the
fan body.
Summary of Contents for Cathay
Page 1: ...CATHAY OWNER S MANUAL...
