8
Figure #6
Install Lightbulbs:
Step 6.
Insert the fi ve 15-watt lightbulbs for the uplight
as shown in Figure #6.
NOTE:
When replacing these lightbulbs, be sure to
use only 15-watt maximum.
(5) 15-watt
Uplight Bulbs
LIGHTBULBS
HANGING THE FAN
Step 7a.
To hang the fan body in the canopy, hold
the fan body fi rmly and insert the ball into the canopy
opening. Check that no wires are pinched. Rotate
the fan body until the slot in the ball fi ts into the pin
opposite the canopy opening.
Step 7b.
Trim excess motor wires, leaving at least
6 inches above the downrod. Strip
1
/
2
-inch insulation
from the end of each wire using a wire stripper
(available at your local hardware store).
BALL
SLOT
PIN
LIGHTBULB INSTALLATION (uplight)
LIGHTBULB INSTALLATION (uplight)
CANOPY RING
Figure #7
POLE COVER
