M8502-01 • 11/21/12
M8502-01 • 11/21/12
1.888.830.1326
1.888.830.1326
4
5
Using the single pin connectors, connect the
black or blue wire from the fan to the black
wire from the light kit. Connect the white
wire from the fan to the white wire from the
light kit.
TYPE-A ASSEMBLY INSTRUCTIONS
TYPE-A ASSEMBLY INSTRUCTIONS (CONTINUED)
3
Do not allow the light kit to hang
only by the wire connections!
If your fan does not have pin connectors on the
wires coming from the switch housing, install
the wiring harness provided. Using the provided
wire connectors connect the white wire from the
fan to the white wire from the wire harness and
connect the black or blue wire from the fan to
the black wire from the wire harness.
Wire
Connector
Switch
Housing
Remove the pre-installed light kit screws
and replace them with the longer light kit
screws provided.
Light Kit
Screw
1
2
Lift the light kit up to meet the lower
switch housing. Align the light kit screws
with the threaded holes in the lower
switch housing. Tighten screws securely.
4
Light Kit
Screw
Installing the pull chain pendant -
Attach the pull chain pendant to the
end of the short chains coming from the
switch housing and the light kit.
Installing the bulb - Install a bulb into each
socket. When necessary, replace bulbs with
bulbs of same type and wattage.
Installing the shades (sold separately)-
Remove the socket rings from the
sockets. Install each shade onto a socket.
Install the socket rings onto the sockets
by turning them clockwise using the
socket ring tool.
Socket
Ring Tool
Socket
Ring
Shade
(sold separately
Socket
ON
Turn
Pow
er
Turn on power. Your installation
is complete!
7
6
8
5
