2
MOUNTING THE CABINET
• Measure and mark out the dimensions shown.
- Use a spirit level & straight edge to ensure the unit is level.
• Using a 7.5mm masonry drill bit, drill 2 holes at dimensions shown
above (516mm apart).
• To secure the cabinet to the wall, use two 8mm x 60mm deep nail
anchors.
• To securely attach retracting line cabinet to the wall, do not drill into
gaps (or mortar) between bricks.
NOTE: The fasteners used, must not sit flush with the wall, but protrude
slightly, to allow the cabinet to be mounted on them using the keyhole
slots.
MOUNTING THE RECEIVING BRACKET