19 of 63
CFW-2182 – User Guide
UG01233 v1.2 August 13, 2020
© Casa Systems 2020
10
Plug the Ethernet cable into the Ethernet port.
Figure 21 - Plugging in the Ethernet cable
11
Put the neck into the opening and turn the neck clockwise until it locks in place.
12
Push the rubber seal and ferrule into the neck then screw the nut on to the neck.
Figure 22 - Rubber seal and ferrule inserted into neck
13
Turn the nut clockwise to tighten it the washer seal against the housing. Continue turning the nut until
completely assembled. This will allow the washer seal to grip the cable while also applying enough
pressure to the washer seal to prevent dust and moisture entering the unit.
Figure 23 - Turning the nut clockwise
