CAS PW-II, Service Manual

Page: 10 / 26

PW-II
Service Manual
10
2.1.1.4. C4-4 Setting
UNIT CHANGE Comma Setting
lb ROM Version Only
Buzzer Setting
ENABLE 1XXX XXXX ENABLE XXX1 XXXX ENABLE XXXX 0XXX
DISABLE 0XXX XXXX DISABLE XXX0 XXXX DISABLE XXXX 1XXX
C4-4 is to set to use the unit change function and the displaying unit.
2.1.1.5.
C4-5 & C4-6 Setting
2.1.2. SPAN Calibration Setting (C-3)
(1) Pressing and holding “Calibration Switch” press [POWER] key.
After “CAL” message blinks three times and shows the version of scale, it displays “C-0”
message.
(2) Press [TARE] to display “C-3”.
(3) Press [ZERO] key and then it displays “UnLOAd” message.
(4) Press [ZERO] key if you want to scroll it.
Ú To exit from SPAN Calibration mode press [TARE] key when
“
UnLOAd
”
or
“
LOAd
”
message is
displayed.
C4-5 C4-6
Op Amp Setting Zero Range Setting
HA17358 XXXX XXX1 2% 10% 15% 20%
OP2177 XXXX XXX0 XXXX XX01 XXXX XX00 XXXX XX10 XXXX XX11