If you set up LOW/HIGH limit wrong, “WL ERR” will be shown on the display. Then you have to set it
up again. For example) LOW=100.00kg HIGH=90.00kg
High limit is lower than Low limit.
Press the MODE key to go to weighing mode.
Press the SET key, the
display shows “WL ON”.
Press the HOLD( ) or
PRINT( ) key to have
number up or down. To enter
next digit, press the SAMPLE
key.
Press the SET key to set up
high value, the display
shows “H000.00”.
Press the HOLD( ) or
PRINT( ) key to have
number up or down. To enter
next digit, press the
SAMPLE( ) key.
13
You can delete cumulative weight sum or aggregate times. Press the SET key to display cumulative
weight sum or aggregate times and then press the ZERO(ESC key).
To print out cumulative weight sum, press the SET key to display cumulative weight sum or aggregate
times and then press the PRINT key.
7. Weight Comparison Function(HI/OK/LOW)
7-1. How to compare weight
Press the MODE key until
the display shows “WL OFF”.
It means that weight limit
function is deactivated.
Press the HOLD key to
activate this function, the
display shows “WL ON”.
Press the SET key to set up
low value, the display shows
“L000.00”.
To cancel last added weight, press the SET key to display cumulative weight sum or aggregate times
and then press the SAMPLE key. The display shows “S SUB”.
12
The display shows cumulative weight sum and aggregate times every time pressing the SET key.
The SUM key is flashed.
