10
6. General Functions
(1) Zero function
Use to correct drifted zero value when the scale is unloaded, and motion is not detected.
This function works when
ZERO KEY
is pressed, and the
ZERO LAMP
is on.
(2) Setting tare weight function.
Press the
TARE KEY
. Then, the scale will memorize the weight of the tare and will
display
zero v
alue ‘0’kg. The
TARE LAMP
will be on.
To escape this function, remove everything from the scale, and press the
TARE or
ZERO
KEY
. Then, the
TARE LAMP
will be off and this function is terminated.
(3) Hold function (F08 of setting mode must be set to 4)
Automatic hold function
■ Press
* KEY
when the scale is empty (Initial zero state).
■ The weight display will indicate
.
HOLD LAMP
is on.
■ After loading a thing, if the weight turns stable then, a display shows and
average weight will appear.
■ The weight of a loaded thing is displayed.
■ To escape the automatic hold mode, when zero point is on, press
* KEY
.
Then, the message of
is displayed and
HOLD LAMP
is off and normal
weighing mode is reverted.
Manual hold function
■ Press
* KEY
loading a thing.
■ This message of
is displayed and sequentially the message of is
shown with appearing the average weight.
■ The weight of a loaded thing is displayed.
■ To escape the manual hold mode, remove everything from a hook, or press the
* KEY
.
Then,
HOLD LAMP
will be off and the scale changes from a hold mode to
a normal
mode.
