CAS Scale ND 300, Owner'S Manual, Page: 10 / 15

11
OPERATIONS
■ When you turn on the power switch, the scale will count "00000" to "99999",
then the scale will read "0.0" on the display. This is called the ZERO state.
If the scale is not ZERO state though there is nothing on the platter, press the
ZERO key.
■ If the weight is not stable, press the HOLD key. Then you will see the
average weight.
■ The display indicates if the scale is at ZERO or if there is a TARE entered into
the scale by way of a ZERO and NET lamps.
1. General Weighing
■ Wait until the display shows zero.
①
Place a commodity on
the platter.
②
Remove the commodity
from the platter.
N
▶
OTE: The symbol represents the lamp on the display above.
◀
OPERATIONS