SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD
Http://www.carymart.com E-Mail: [email protected]
We have learned remote control to the receiver. If you don
’
t want the receiver to work with the remote control, you can delete all codes of remote
controls, which are stored in the receiver.
Operation: Press and hold the button of receiver until signal LED flashes slowly; release the button, LED keeps slow flash. That means all stored
codes have been deleted successfully.
Learning the button of remote control:
1) Press the button of receiver; signal LED on the receiver keeps shining. The receiver enters into status of LEARNING.
2) Press any one button on remote control. If signal LED flashes quickly 15 times and turns off, it means learning is successful.
3) When receiver is in the status of LEARNING, press again the button of receiver, signal LED turns off, learning process will be discontinued.
4) The receiver can learn several remote controls with different codes.
Interior Analogue Circuit
Application: For DC12V motor or lamp
J
u
m
p
er
-2
J
u
m
p
er
-1
Button
J
u
m
p
er
-2
J
u
m
p
er
-1
Button
Signal LED
Power LED
Antenna
R
F
m
od
u
le
Antenna
R
F
m
odu
le
Power LED
Signal LED
IC
Beeper
IC
Beeper
Relay 1
Relay 2
Relay 1
Relay 2
DC0~28V/ AC110~240V
Application Circuit
Power supply
A, B=Normally Closed; B, C=Normally Open.
Lamp 1
Lamp 2
_
+
A
B
C
A
B
C
_
+
A
B
C
A
B
C
M
_
+
Power supply
Motor 1
Motor 2
M
+
+
